Save Time With Peel And Stick Wallpaper To Add Color To Your Walls

Are you looking for an easy and time-saving way to add color to your walls? Look no further than peel and stick wallpaper! With a few simple steps, you can instantly transform your walls with this modern and stylish wallpaper option. Save time with peel and stick wallpaper to give your walls a new look in no time. Whether you want to update a single wall or an entire room, peel and stick wallpaper is the perfect way to quickly and easily add color and style to any space. Read on to find out more about how this easy-to-use wallpaper can help you make your home look amazing.

Ensure your wall surface is clean and smooth

If you want to ensure a successful peel and stick wallpaper installation, the most important step is to make sure your wall surface is clean and smooth. Make sure any dust, dirt, or debris is removed from the walls before you begin. Additionally, any lumps or bumps should be sanded down and filled in.

Doing this will help ensure that your wallpaper adheres to the wall properly. To get the best results, take the time to clean and prep the wall thoroughly. Use a damp cloth with warm water and mild soap to wipe away any dirt or grime from the surface. After wiping away the excess moisture, wait until it’s completely dry before applying the wallpaper.

For more stubborn dirt and grime, use a damp sponge with some mild detergent mixed in with warm water. Scrub lightly until all of the dirt and grime is gone. Once you’ve prepped the wall properly, it’s time to start hanging up your blue peel and stick wallpaper. Carefully measure each section of the wall where you plan on installing the wallpaper and cut it to size.

Then start at one corner of the wall and carefully peel back the backing paper while sticking it onto the wall at an angle. Smooth out any air bubbles with your hands and continue repeating until the entire wall is covered. After all of the paper is installed, use a soft cloth to gently press against the edges of each piece of wallpaper to secure it into place.

Use a measuring tape and a utility knife to cut strips of wallpaper

When using a peel and stick wallpaper, it is important to measure and cut each strip of wallpaper with precision. Start by measuring the wall from top to bottom and mark a straight line across the top of the wallpaper with a pencil.

To ensure the most accurate measurements, use a measuring tape to measure the desired length of your wall. Once you have measured the length of the wall, you can use a utility knife to cut along the lines marked on the wallpaper. When cutting the wallpaper, make sure to hold the utility knife at a 45-degree angle in order to achieve a clean and straight cut.

If you are applying wallpaper with a pattern, make sure to measure and cut accurately in order to ensure the design is consistent along the entire wall. Additionally, when trimming around outlets or corners, be sure to measure twice and cut once as any mistakes may be difficult to fix afterward.

Once the strips are cut, begin peeling off the backing paper and apply the wallpaper directly onto the wall. It is best to start from the top corner and work down toward the floor as this will help ensure an even application. Lastly, be sure to press down firmly on all areas as this will help create a strong bond between the wall and the wallpaper. By following these steps, you will be able to enjoy an aesthetically pleasing interior décor without having to invest too much time or effort.

Install your first strip of wallpaper in the top corner of the wall

Before you begin, ensure your wall surface is clean and smooth. You’ll want to make sure there are no bumps or ridges that could prevent your wallpaper from adhering properly.

Start by taking a measuring tape and using a utility knife to cut strips of wallpaper based on the height of your wall. Measure twice before cutting your wallpaper to ensure accuracy.

Once you’ve cut your strips, start in the top corner of the wall. Peel back the backing paper and stick the wallpaper to the wall, smoothing it as you go with your hand. Use a squeegee or builder’s level to reduce air bubbles and ensure the paper is flat against the wall.

Continue until all strips have been applied to the wall. To join two strips together, simply overlap them and use a cloth or sponge to press them firmly into place.

Once you’ve finished installing the wallpaper, stand back and admire your work. Enjoy the transformation your walls have undergone! Because peel and stick wallpaper doesn’t require any paste, you can enjoy not having to worry about mess and cleanup. Additionally, if any portion of the wallpaper gets damaged or begins to peel off, you can easily peel it off and replace it with a new piece. Plus, if you ever decide to switch up the look of your home, this type of wallpaper can easily be removed without damaging the walls underneath.

Use a squeegee or builder’s level to reduce air bubbles

Once you have applied your wallpaper to the wall, you will want to ensure that there are no air bubbles present. This can be done by using a squeegee or builder’s level. To use a squeegee, start at the top of the wallpaper strip and work your way down in a single motion. This will push any air bubbles toward the edges of the strip and help them disperse.

If you find that you are having difficulty pushing out the air bubbles with your squeegee, you can try using a builder’s level instead. Run the level along the length of the wallpaper strip from top to bottom. This should help eliminate any air bubbles that are present. Make sure to be gentle with both tools so as not to cause damage to your wallpaper.

Once you are finished smoothing out the wallpaper strip, remove any excess material around the edges with a razor blade or pair of scissors. Be careful to only remove excess material, as cutting too deeply into the wallpaper could create unwanted tears. After all excess material has been removed, use painter’s tape to secure the edges of the wallpaper strips to the walls.

This will ensure that they do not come loose over time due to bumps or impacts. Finally, make sure that your wallpaper is dry before adding any additional decorations or furniture to your walls. Allowing it time to dry will ensure its longevity and keep it looking great for years to come.

--

Featured image: (C) Nailed It